Range Repair
Viking gas, dual-fuel and all-electric ranges in Brookline kitchens, where a professional range is often squeezed into a pre-war footprint. We work on ignition and spark modules, burner and orifice problems, simmer control, valves, knobs and the oven side of a range as one job.
The way it gets described
- Burner clicking long after the flame has caught
- Simmer setting that will not hold below a rolling boil
- Uneven flame around one burner ring
- Knob turning freely without the gas following
What the meter is put on
- Manifold pressure at the regulator, with burners cold and again under load
- Spark output and flame-sense return, burner by burner
- Low-flame screw and simmer behaviour on each valve
- Knob shafts, stems and the seal behind the control panel
Flat $95 service call covering the visit and the diagnosis, credited against the repair if you approve it.
What people say afterwards
5.0
out of 5, from 585 reviews
★★★★★
Fourth floor, shared lobby and a tiny lift, which he managed without a word of complaint. The igniter module had failed and every burner was sparking together. New module and it behaved itself.
Fenella R. · Coolidge Corner
★★★★★
The front burner clicked away long after it had lit. He found the spark electrode cracked and soaked with old spill. Replaced it and cleaned the others while he had the top off anyway.
Estelle P. · Washington Square
★★★★★
One ring had a flame leaning to one side on our island. Blocked ports from a boilover. He lifted the cap, cleared them out, and checked the rest.
Isaac B. · South Brookline
Book the range repair.
Model and serial number, a plain description of the fault, and whether the kitchen is up a stair or through a lobby. That is the whole call.
Answered 24/7 · on the road 8:00 am – 8:00 pm, seven days · flat $95 service call, credited against an approved repair
